9.49, Set Bosch EV-14, 750cc, 72lb, US Euro Fit, Matched, Fuel Injectors E85

Description

SALE (6) 750cc, 72lb US-, Euro-Fit,  EV-14 Flow-Matched High-Impedance Fuel Injectors, E85
Fiveo MSRP List Price: 9.99
eBay Sale Price: 9.49 - You save .50
FIVEOMOTORSPORT FUEL INJECTORS are custom-manufactured in small-quantity batches to achieve the highest quality product.
Our injectors are all-fuels rated; including gasoline (MTBE), and E-85.
The finished injectors are then flowed and inscribed with a control number.
Data is recorded for each injector. The fuel injectors are then grouped into matched sets ready for shipping.
FLOW CHART: Each set is sold with a complete and unique flow-data chart indicating individual static flow rates at 3.0, 3.5, and 4.0 BAR.
As well as 3.0 BAR dynamic pulse testing for idle (15% duty-cycle) and 50% duty-cycle.
Along with a complete dead time off-set (latency) table. Flow matching was done with industry-standard equipment of the highest quality.
The tests were performed at varying temperatures to achieve realistic results.
Linear tuning with excellent low-end, and idle rpm.
Fiveo is the only fuel injector seller that can claim this level of technology.
SPECIAL NOTE TO OUR E85 USERS:
Ethanol based fuels tend to "dry" the fuel injector outlet orifices.
Users/tuners should be made aware that this may cause a "sticking" problem in fuel injectors that sit idle for a prolonged period of time.
It is suggested for applications running high ethanol content based fuels, to periodically incorporate into their fuel-system-maintenance a drop of light petroleum-based lubricant for each fuel injector.
This is also considered to be good maintenance, but not essential, for stainless steel based (Black-Ops Series) fuel injectors.
It should also be noted that for optimum performance the entire fuel system should be made up of ethanol approved materials including all fuel lines/fuel pump/fuel filter, etc.
This injector set fits the OEM fuel rail and intake for U.S. Domestic and European applications.
Part number: 115U750
Flow Rate: 750 cc/min, 72 LBS/HR at 43.5 PSI
Resistance: 12.8 Ohms
Voltage: 8-15 Volts, Nominal 13.5 Volts
Pressure: Min. 36 PSI (2.5 bar),  Max. 130 PSI (9 bar)
Surface finish: Dk.Red composite
All O-rings Included for installation.
Fiveomotorsport is a respected name in high performance and racing parts.
This Generation III composite fuel injector is better suited to the high pressures of modern engines over the old fused plastic/metal body injectors.
None of our customers have ever reported a blowout or failed coil even with pressures
exceeding 90 psi.
This fuel injector has excellent high and low pulse width response times
within 2% down to 2 ms.
These sets are very consistent and will require no more than 1% trim for easy tuning
with accurate compensation.
(See additional specs below).